Zwei aufrechte schwarze Messgeräte mit gelben/roten Knöpfen
Coating thickness gauges with external Fe and NFe probe

SaluTron® D1 / D2X

For absolutely precise layer thickness measurement even in hard-to-reach areas

The success concept of the proven layer thickness measuring device SaluTron® D1 and the improved version​​​​​​​ SaluTron® D2X not only includes the high precision of the measurement results, but also the absolutely simple and user-friendly operation.
With the Fe probe, non-magnetic layers such as paints, plastics, chrome, copper, zinc, enamel, etc. can be measured on steel or iron. With the NFe probe, insulating layers such as paints, enamel, plastics, paper, glass, rubber, etc. can be measured on aluminum, copper, brass, zinc, and certain types of stainless steel. Measurement of anodized layers on aluminum is also possible.

Coating thickness gauge SaluTron®D1

  • splash-proof according to protection class IP 65
  • easy adjustment and operation through menu guidance
  • quick zeroing and calibration of the device
  • measuring accuracy: ± (1.5 µm + 2%) or ± (0.06 mil + 2%)
  • continuous measurements possible
  • specific calibration of certain measuring ranges
  • easier measurement on round bodies such as rods and axles thanks to practical V-groove
  • automatic probe detection
  • setting of the unit of measurement in "mil" or "μm" or "mm"
  • automatic shutdown when not in use
  • display illumination

Coating thickness gauge SaluTron®D2X

in addition to the features of the SaluTron®D1:

  • up to 8192 memory locations
  • large easy-to-read display
  • measurement values can be grouped into blocks with calculation of statistical values such as mean, standard deviation, minimum, maximum, coefficient of variation, histogram for single or multiple blocks
  • input of data for the measurement protocol header
  • output of the measurement protocol on an HP-compatible infrared printer
  • data transfer via USB interface to PC
  • import of measurement values into an EXCEL spreadsheet possible
  • input and activation of min./max. limits with audible signal when exceeded
  • storage of up to 16 specific workpiece calibrations with comments
Standard delivery scope
  • Handheld device SaluTron® D1 or SaluTron® D2X
  • Fe or NFe probe
  • Fe or NFe zero plates
  • Set of 7 calibration foils
  • 2 x 1.5 V AA alkaline batteries
  • Service case
  • User manual
  • USB data transfer cable and USB stick with software
    (only  SaluTron® D2X)
Special accessories
  • Additional Fe or NFe probe
  • Infrared-HP-compatible mini thermal printer for on-site data printing
Specifications
Base material (substrate)Fe:iron or steel
NFe:non-magnetic metals such as aluminum, zinc, copper, brass, some stainless steel grades
LayersFe:non-magnetic coatings such as lacquer, plastics, chromium, copper, zinc, enamel, etc.
NFe:insulating coatings such as lacquer, enamel, plastics, paper, glass, rubber, etc., anodized aluminum
Measuring rangeFe:0 - 2000 µm (0 - 2 mm) or 0,00 - 80 mil
NFe:0 - 800 µm or 0,00 - 32 mil
Measurement displayFe:0,0 - 999 µm, 1,00 - 2,00 mm
or 0,00 - 80 mil
NFe:0,0 - 800 µm or 0,0 - 32 mil
ResolutionFe:0,1 µm
1 µm
0,01 mm
or
0,01 mil
0,1 mil		in the range of 0,0 - 99,9 µm
in the range of 100 - 999 µm
in the range of 1,00 - 2,00 mm

in the range of 0,00 - 9,99 mil
in the range of 10,0 - 80,0 mil
NFe:0,1 µm
1 µm
or
0,01 mil
0,1 mil		in the range of 0,0 - 99,9 µm
in the range of 100 - 800 µm

in the range of 0,00 - 9,99 mil
in the range of 10,0 - 32 mil
Accuracy ± (1,5 µm + 2%) or ± (0,06 mil +2%)
Minimum thickness of base materialFe:0,20 mm or 8 mil
NFe:0,05 mm or 2 mil
Minimum measuring area 10 x 10 mm or 0,4" x 0,4"
Memory (D2X only) 8192 locations
Blocks (D2X only) optional in range of storage capacity
TemperatureStoring:-10°C to 60°C or 14°F to 140°F
Operating:-0°C to 60°C or 32°F to 140°F
Probes Single point
Interface (D2X only) USB
Printer (D2X only) Infrared HP-compatible mini thermal printer (available on request)
Power supply 2 x 1,5 V AA alkaine
Dimensions (L x W x H)D1:120 x 65 x 22 mm or 4,7" x 2,6" x 0,9"
D2X:150 x 82 x 33 mm or 5,9" x 3,2" x 1,3"
WeightD1:150 g or 5,3 oz incl. battery
D2X:260 g or 9,17 oz incl. battery

All SaluTron® gauges correspond to national (DIN) and international (ISO, BS, ASTM) norms and possess the CE-sign.
Specifications are subject to change without prior notice.

Request a quote or further information here!

Use of coating thickness measuring devices

  • In paint shops
  • For powder and paint coatings
  • For automotive appraisers and automotive insurance companies
  • In the automotive industry
  • In workshops
  • In quality control
  • In bridge construction
  • In shipbuilding
  • In goods receivingIn the manufacturing process
  • In the laboratory

You might also be interested in the following coating thickness measuring devices: