Precise & practical for layer thicknesses up to 10 mm

SaluTron® D6

Combination device with various Fe and NFe interchangeable probes

This coating thickness gauge offers the flexibility to use different types of probes for measurements under various conditions and over a wide measuring range, all while maintaining precision.

The Fe probes (F400, F1, F1-90, and F10) are ideal for measuring non-magnetic coatings like paints, plastics, chrome, copper, zinc, enamel, etc. on steel or iron surfaces.

The NFe probe (N1) is designed for measuring insulating coatings such as paints, enamel, plastics, paper, rubber, glass, etc. on aluminum, copper, brass, zinc, and certain types of stainless steel. It can also accurately measure anodized coatings on aluminum.

Properties

XXL measuring range (F10 probe): 0 - 10 mm
Standard measuring range (F1/N1 probe): 0 - 1.25 mm
Automatic probe detection
Setting of measurement unit μm or mil
Input of limit values (min. and max.) with acoustic alarm signal when exceeded
High measurement accuracy (depending on probe type)
Acoustic signal after each measurement
Turning on or off the key tone
Continuous measurement possible
Absolutely fast zeroing and calibration
Measurement memory: 99 individual values in direct mode or 495 measurement values in 5 groups with 99 memory locations each
Calculation and display of statistical values (mean, standard deviation, minimum and maximum value)
Quick delete function: single value or complete
Transfer of measurement data via USB interface to PC
Automatic shutdown when not in use
Display backlighting

Standard delivery scope

Handheld device SaluTron^® D6
Fe (F1) or NFe (N1) measuring probe
Fe or NFe zero plates
Set of 5 calibration foils
2 x 1.5 V AA alkaline batteries
Sturdy service case
User manual
USB data transfer cable and USB stick with software

Special accessories

Additional Fe or NFe probes for special applications

Downloads

Data Sheet SaluTron D6 (PDF)

pdf - 1 MB

User Manual SaluTron D6 (PDF)

pdf - 689 KB

SaluTron Rel. D6 (ZIP)

Software

zip - 5 MB

Probes

Probe model	F1	F10	F400	N1
Base material (substrate)	iron or steel			non-magnetic metals such as aluminum, zinc, copper, brass, some stainless steel grades
Layers	paints, lacquers, plastics, chromium, copper, zinc, enamel, etc. (non-magnetic)			paints, lacquers, plastics, chromium, copper, zinc, enamel, etc. (non-magnetic)
Function principle	magnetic induction			eddy current
Measuring range	0-1.250 µm (0-1,25 mm)	0-10.000 µm (0-10 mm)	0-400 µm (0-0,4 mm)	0-1.250 µm (0-1,25 mm)
Resolution	0,1 µm	10 µm	0,1 µm	0,1 µm
Accuracy (H=nominal value)
One-point-calibration	±(3%H+1) µm	±(3%H+10) µm	±(3%H+1) µm	±(3%H+1,5) µm
Two-point-calibration	±((1-3)%H+1) µm	±((1-3)%H+10) µm	±((1-3)%H+0,7) µm	±((1-3)%H+1,5) µm
Measuring conditions
Min. curvature radius	1,5 mm	10 mm	convex / 1 mm	3 mm
Diameter of minimum area	Ø 7 mm	Ø 40 mm	Ø 3 mm	Ø 5 mm
Critical thickness of substrate	0,5 mm	2 mm	0,2 mm	0,3 mm

Handheld device

Memory capacity	Direct mode with 99 storage places and batch mode with 495 locations (5 blocks with 99 values each)
Memory mode	automatically or manually
Measuring unit	µm or mil
Limits	Minimum and maximum can be preset; with visual and audible alarm when exceeding
Statistic values	Mean, minimum, maximum, number of measurements, standard deviation
Delete function	Single data or all data in memory
Error warning	visually or acoustically
Probe recognition	automatic
Calibration methods	2-point or zero calibration
Menu language	english
Buttons beep	adjustable
Backlight	adjustable
Shutdown	manually or automatically
Battery capacity indicator	available
Power supply	2 x 1,5 V AA alkaline
Dimensions (L x B X H)	approx. 125 x 65 x 30 mm or. 4,7" x 2,6" x 0,9"
Weight	approx. 340 g (incl. batteries) or 11 oz

All SaluTron^® gauges correspond to national (DIN) and international (ISO, BS, ASTM) norms and possess the CE-sign.
Specifications are subject to change without prior notice.

Request a quote or further information here!

Use of coating thickness measuring devices

In paint shops
For powder and paint coatings
For automotive appraisers and automotive insurance companies
In the automotive industry
In workshops
In quality control
In bridge construction
In shipbuilding
In goods receivingIn the manufacturing process
In the laboratory