Tint measuring gauge TintTector Alpha©

For measuring the transmittance

Tinted car windows are in fashion. However, for safety reasons the transmittance of tinted car windows is regulated by law. The innovative TintTector Alpha©measures the transmittance of tinted car windows and indicates the transmittance in percentage on demand.

The gauge is intended for use at technical car inspection centers, during routine police checks for compliance with new regulations and during the production of the vehicle windows and/or its maintenance. To this effect the gauges reflects the optical characteristics of the human eye and therefore complies with ISO 3538.

And this is how it works: Attach the illuminant source to the clean outside windscreen or side window with the aid of the integrated suction cups and place the detector head on the inside of said window, then carefully aligning the two parts. Integrated magnets in both the light source and the detector protect them from falling. The result (the indicated measurement is the transmittance in percentage, defined as the ratio of the absorbed by the glass to the light onto the glass) is displayed after a few seconds on the LCD screen once the measurement sequence has been initiated- it's so simple, fast and easy to use.

Characteristics

  • High repeatability ≤ 0,2 %
  • Precise characteristics complying with the spectral response of the human eye during daytime
  • Simple calibration procedure
  • High quality certified optical system
  • Optical characteristics comply with ISO 3538
  • Ease of operation
  • Battery powered
  • Complies with EMC
  • 3 years warranty
Tint measuring gauge TintTector Alpha - Service case
Tint measuring gauge TintTector Alpha

Standard delivery range

  • TintTector Alpha©
  • Illuminant with white light source type A and color temperature 2856 K ± 50 K
  • Measuring head with a detector having the spectral sensitivity of a human eye V (λ) during daytime(CIE) 
  • 12 V, 200 mA battery re-charger
  • Service Case 
  • Test probe 

 

 

Specifications

All SaluTron® gauges correspond to national (DIN) and international (ISO, BS, ASTM) norms and possess the CE-sign.
Specifications are subject to change without prior notice.

Illuminant source Type A
Colour temperature of illuminant source 2856K ± 50K
Optical detector complying with V(lambda) human eye sensitivity
Measured quantity % light transmitted
Measuring range 0 bis 100%
Maximum glass thickness 10 mm
Measuring accuracy for entire range ≤ 2%
Temperature range 5 to 40°C
Relative humidity < 90%
Atmospheric pressure 860 to 1060 hPa