![[Translate to English:]](/fileadmin/_processed_/d/a/csm_schichtdickenmessgeraet-salutron-d6_eeafb93410.webp "[Translate to English:]"){kind=small}
![[Translate to English:] SaluTron Vibro 200](/fileadmin/_processed_/f/1/csm_salutron-vibro-200_eda5baa52b.webp)
![[Translate to English:] SaluTron Vibro 260](/fileadmin/_processed_/5/3/csm_salutron-vibro-260_014d26f682.webp)
Hardness measuring device TIME®5210C with Ethernet for industrial hardness testing
TIME®5210C
The TIME®5210C hardness measuring device is a new hardness tester for industrial use on site. It is powered by 220 V AC and delivers stable readings even in harsh industrial environments thanks to its high resistance to interference.
Via the Ethernet interface (Modbus TCP) the device can be connected to PLC controllers and PCs and integrated into the user’s online testing system. In addition, measurement parameters and calibration can be set directly on the device or entirely via the host computer.
All seven digital TIME impact devices can be used because the type is identified automatically; the standard impact device type D is included in the scope of delivery. This makes the TIME®5210C suitable for automated production lines and for hardness testing of batch workpieces.
Features of the TIME®5210C
- robust metal housing in sealed design, compact and light
- high resistance to interference for stable readings in industrial environments
- 2.42-inch OLED display with 128 × 64 dots, bright and high-contrast
- all 7 digital impact device types usable, automatic identification without recalibration
- automatic detection of the common impact directions (except impact device type G)
- connection to PLC controllers and PCs via Ethernet (Modbus TCP)
- adjustable IP address for on-site networking
- measurement parameters (material, hardness system, impact direction, conversion table) can be set by software or on the device
- calibration by software or on the device
- powered by 220 V AC (single-phase)
Applications of the TIME®5210C
- hardness testing of batch workpieces in automated production lines
- integration into online testing systems via PLC controller or PC
- semi-automatic hardness testing with parameters set directly on the device
- fully automatic online hardness measurement controlled by the host computer
- hardness testing in industrial field use
Additional equipment for the TIME®5210C
- additional impact devices for special applications
- support rings for measurements on curved surfaces
Standard scope of delivery of the TIME®5210C
- TIME®5210C hardness measuring device
- digital impact device type D
- small support ring
- nylon brush
- hardness test block
- power cable
- Ethernet cable
Optional accessories for the TIME®5210C
- additional impact devices for special applications
- set of support rings for measurements on curved surfaces with a radius of less than 30 mm. They make it easier to position the device optimally on the test piece. Available in 12 different versions.
Downloads
Data sheet TIME®5210C
pdf - 219 KB
Technical specifications of the TIME®5210C
| Measuring range | 170–960 HLD |
| Measuring direction | 360° |
| Hardness scales | HL, HV, HB, HRC, HS, HRB, HRA |
| Display | 2.42-inch OLED, 128 × 64 dots |
| Communication interface | Ethernet |
| Communication protocol | Modbus TCP |
| Power supply | 220 V AC, single-phase |
| Optional accessories | Support rings |
Technical changes reserved.
Impact devices
| Impact Device | D, DC, DL | D+15 | C | G | |
|---|---|---|---|---|---|
| Impact Energy | 11 mJ | 11 mJ | 2.7 mJ | 90 mJ | |
| Weight of Impact Body | D+DC: 5.5 g DL: 7.2 g | 7.8 g | 3.0 g | 20.0 g | |
| Hardness of Test Tip | 1600 HV | 1600 HV | 1600 HV | 1600 HV | |
| Diameter of Test Tip | 3 mm | 3 mm | 3 mm | 5 mm | |
| Material of Test Tip | Tungsten Carbide | Tungsten Carbide | Tungsten Carbide | Tungsten Carbide | |
| Impact Device Diameter | 20 mm | 20 mm | 20 mm | 30 mm | |
| Impact Device Length | D: 147 mm DC: 86 mm DL: 203 mm | 162 mm | 141 mm | 254 mm | |
| Impact Device Weight | 50 g | 80 g | 75 g | 250 g | |
| Max. Hardness of Test Piece | 940 HV | 940 HV | 1000 HV | 650 HB | |
| Average Roughness of Test Piece Surface Ra | 1.6 µm | 1.6 µm | 0.4 µm | 6.3 µm | |
| Minimum Weight of Test Piece | |||||
| direct measurement | > 5 kg | > 5 kg | > 1.5 kg | > 15 kg | |
| on solid base | 2-5 kg | 2-5 kg | 0.5-1.5 kg | 5-15 kg | |
| Coupling with Coupling Paste | 0.05-2 kg | 0.05-2 kg | 0.02-0.5 kg | 0.5-5 kg | |
| Minimum Thickness of Test Piece | |||||
| with close coupling | 5 mm | 5 mm | 1 mm | 10 mm | |
| Minimum Layer Thickness for Surface Hardening | ≥ 0.8 mm | ≥ 0.8 mm | ≥ 0.2 mm | ≥ 1.2 mm | |
| Size of Impact Impression | |||||
| Hardness 300 HV | Ø - Impression | 0.54 mm | 0.54 mm | 0.38 mm | 1.03 mm |
| Impression Depth | 24 µm | 24 µm | 12 µm | 53 µm | |
| Hardness 600 HV | Ø - Impression | 0.54 mm | 0.54 mm | 0.32 mm | 0.90 mm |
| Impression Depth | 17 µm | 17 µm | 8 µm | 41 µm | |
| Hardness 800 HV | Ø - Impression | 0.35 mm | 0.35 mm | 0.35 mm | - |
| Impression Depth | 10 µm | 10 µm | 7 µm | - | |
| Application of Impact Devices | |||||
| Impact Device D | Standard impact device for most hardness testing tasks | ||||
| Impact Device DC | Extremely short, for measurements in holes, cylinders or internal measurements on workpieces | ||||
| Impact Device DL | Diameter of the tube in the front part: 2.78 mm; for measurements in tight inaccessible places and recesses | ||||
| Impact Device D+15 | Particularly narrow attachment with recessed coil for measurements in grooves and recesses, same properties as Type D; only for steel | ||||
| Impact Device C | Reduced impact energy, approx. 1/4 of Type D; for surface-hardened workpieces, coatings, thinly coated or impact-sensitive parts (low impression depths) | ||||
| Impact Device G | Enlarged impact body with increased impact energy (approx. 9 times larger than Type D); only small damage to the surface; only for measurements in the Brinell range; for solid material, heavy castings and forgings | ||||
| Impact device type | Hardness value of the Leeb standard hardness block | Deviation from the displayed value | Repeatability |
|---|---|---|---|
| D | 760±30 HLD 530±40 HLD | ±6 HLD ±10 HLD | 6 HLD 10 HLD |
| DC | 760±30 HLDC 530±40 HLDC | ±6 HLDC ±10 HLDC | 6 HLD 10 HLD |
| DL | 878±30 HLDL 736±40 HLDL | ±12 HLDL | 12 HLDL |
| D+15 | 766±30 HLD+15 544±40 HLD+15 | ±12 HLD+15 | 12 HLD+15 |
| G | 590±40 HLG 500±40 HLG | ±12 HLG | 12 HLG |
| C | 822±30HLC 590±40HLC | ±12 HLC | 12 HLC |
Subject to technical changes.
Material and hardness values
| Material | Hardness unit | Impact device | ||||
|---|---|---|---|---|---|---|
| D/DC | D+15 | C | G | DL | ||
| Steel, Cast steel | HRC | 20-68.5 | 19.3-67.9 | 20.0-69.5 | - | 20.7-58.7 |
| HRB | 38.4-99.6 | - | - | 47.7-99.9 | - | |
| HB | 127-651 | 80-638 | 80-683 | 90-646 | 81-646 | |
| HV | 83-976 | 80-937 | 80-996 | - | 80-881 | |
| HS | 32.2-99.5 | 33.3-99.3 | 31.8-102.1 | - | - | |
| Tool steel | HRC | 20.4-67.1 | 19.8-68.2 | 20.7-68.2 | - | - |
| HV | 80-898 | 80-935 | 100-941 | - | - | |
| Hammered steel | HB | 143-650 | - | - | - | - |
| Stainless steel | HRB | 46.5-101.7 | - | - | - | - |
| HB | 85-655 | - | - | - | - | |
| HV | 85-802 | - | - | - | - | |
| Gray cast iron | HRB | - | - | - | - | - |
| HB | 93-334 | - | - | 92-326 | - | |
| HV | - | - | - | - | - | |
| Nodular cast iron | HRC | - | - | - | - | - |
| HB | 131-387 | - | - | 127-364 | - | |
| HV | - | - | - | - | - | |
| Aluminum alloys | HB | 19-164 | - | 23-210 | 32-168 | - |
| HRB | 23.8-84.6 | - | 22.7-85.0 | 23.8-85.5 | - | |
| Brass | HB | 40-173 | - | - | - | - |
| HRB | 13.5-95.3 | - | - | - | ||
| Bronze | HB | 60-290 | - | - | - | - |
| Copper wrought alloys | HB | 45-315 | - | - | - | - |
| No. | Code | Type | Drawing | Use |
|---|---|---|---|---|
| 1 | 03-03,7 | Z10-15 |  | Measurements on cylindrical outer surfaces R10-R15 |
| 2 | 03-03,8 | Z14,5-30 | Measurements on cylindrical outer surfaces R14,5-R30 | |
| 3 | 03-03,9 | Z25-50 | Measurements on cylindrical outer surfaces R25-R50 | |
| 4 | 03-03,10 | HZ11-13 |  | Measurements on cylindrical inner surfaces R11-R13 |
| 5 | 03-03,11 | HZ12,5-17 | Measurements on cylindrical inner surfaces R12,5-R17 | |
| 6 | 03-03,12 | HZ16,5-30 | Measurements on cylindrical inner surfaces R16,5-R30 | |
| 7 | 03-03,13 | K10-15 |  | Measurements on spherical outer surfaces SR10-SR15 |
| 8 | 03-03,14 | K14,5-30 | Measurements on spherical outer surfaces SR14,5-SR30 | |
| 9 | 03-03,15 | HK11-13 |  | Measurements on spherical inner surfaces SR11-SR13 |
| 10 | 03-03,16 | HK12,5-17 | Measurements on spherical inner surfaces SR12,5-SR17 | |
| 11 | 03-03,17 | HK16,5-30 | Measurements on spherical inner surfaces SR16,5-SR30 | |
| 12 | 03-03,18 | UN |  | Measurements on cylindrical outer surfaces, adjustable radius R10-∞ |
HL Testblocks
| Type | Dimensions | Weight | Values |
|---|---|---|---|
| HLD | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (290 - 880) HLD |
| HLC | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (525 - 905) HLC |
| HLDC | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (490 - 830) HLDC |
| HLD+15 | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (481 - 850) HLD+15 |
| HLDL | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (687 - 925) HLDL |
| HLG | Φ: ≥ 119 mm H: ≥ 70 mm | W: ≈ 6200 g | (280 - 680) HLG |
Subject to technical changes.
Areas of application of hardness testers like the TIME®5210C
- automated production lines and online testing systems
- series testing of metallic components
- mechanical engineering
- heat treatment and quality assurance
- research and development