Connection of external impact devices type C, DC, D+15, DL and G is also possible

HardyTest  D200

Professional hardness testing device HardyTest D200 with integrated impact device type D

The hardness testing device HardyTest D200 is particularly suitable for fast and uncomplicated hardness measurements.

It is applicable for almost all hardness measurements on ferrous and non-ferrous metals. In general, the device is used in the power industry, petrochemical industry, apparatus, vehicle and mechanical engineering, quality control, steelworks, and more. By the possibility of connecting additional external impact device types, its range of applications is significantly expanded.

Properties

  • For quick hardness testing on site
  • integrated impact device D
  • Connection of external impact device types C, DC, D+15, DL and G also possible
  • All hardness units: HL (Leeb), HB (Brinell), HRB (Rockwell B), HRC (Rockwell C), HV (Vickers), HS (Shore D)
  • Wide measuring range: 170-960 HLD
  • Memory capacity up to 600 groups (with 1 - 32 measurement values per group)
  • PC data transfer via USB to DataView software or MS Hyperterminal for saving and printing
  • Easy-to-read OLED display
  • High measurement accuracy: up to ± 6 HLD (± 0.75% at around 800HLD)
  • Automatic shutdown
  • Automatic impact direction recognition
  • Automatic or manual deletion of measurement data
  • Setting of limits (Min. and Max. adjustable with arrow indication when exceeded)
  • Calibration on the test block in HL possible

Applications

  • Measurements on steel, cast iron, tool and stainless steel, gray and nodular cast iron, brass, bronze, aluminum and copper wrought alloys
  • Measurements on large and small cavities, bearings, heavy workpieces, permanently mounted parts
  • Damage analysis on pressure vessels, steam generators, etc.
  • Material identification through hardness testing

Additional equipment

  • Support rings (12 pieces) for convex and concave surfaces
Standard delivery scope
  • Hardness Testing Device  HardyTest D200
  • Test block approx. 800 HLD
  • Small support ring
  • USB cable with software USB stick
  • Battery charger
  • Cleaning brush
  • Instruction manual
  • Durable plastic carrying case
Special accessories
  • Set support rings for measurements on curved surfaces with a radius of less than 30 mm. Facilitate optimal positioning on the test piece. Available in 12 different variations.
Downloads
HardyTest Rel. D200 (ZIP)

Software

zip - 6 MB

Specifications
HardyTest D200Impact device D integrated
Hardness UnitsHL (Leeb), HB (Brinell), HRB (Rockwell B), HRC (Rockwell C), HV (Vickers), HS (Shore D)
Measuring Range170-960 HLD
Measuring Accuracyup to ± 6 HLD (± 0.5% based on 800HLD)
ApplicationStandard impact device for most hardness testing tasks. Connection of external impact device types C, DC, D+15, DL, and G also possible.
MaterialsSteel/cast steel, tool steel, stainless steel, gray cast iron, nodular cast iron, aluminum cast alloys, brass, bronze, copper, forged steel
Workpiece RadiusRmin = 50 mm (with support ring: Rmin = 10 mm)
Minimum Test Piece Weight> 5 kg solid material
2-5 kg on stable base
< 2 kg with coupling paste
Minimum Test Piece Thickness5 mm (coupled)
Minimum Roughness (ISO Class)1.6 µm (Ra)
Minimum Hardness Depth0.8 mm
Impression Depth300 HV=24 µm, 600 HV=17 µm, 800 HV=10 µm
Testing Directionautomatically or manually adjustable
LanguageMenu: English, Manual: German
Functionsautomatic shutdown, battery indicator, limit value setting (with arrow indication when exceeded), calibration on test block in HL
StatisticsSetting the number of measurements for forming the average
Data StorageStorage, transfer, or deletion of measurement values manually / automatically, 600 averages (1-32 measurements/average)
PC Data ProcessingUSB cable with software
StandardASTM A956, DIN 50156

All SaluTron® measuring devices comply with national (DIN) and international (ISO, BS, ASTM) standards and they bear the CE mark.
Subject to technical changes.

Material and hardness values
MaterialHRCHRBHBHVHS
Steel/Cast Steel20 - 6838 - 10081 - 65481 - 95532 - 100
Tool Steel20 - 67--80 - 898-
Stainless Steel-46 - 10185 - 65585 - 802-
Gray Cast Iron--93 - 334--
Nodular Cast Iron--131 - 387--
Aluminum Casting Alloys-23 - 8419 - 164--
Brass-13 - 9540 - 173--
Bronze--60 - 290--
Copper--45 - 315--

The ranges correspond to the application limits of static test methods.
Subject to technical changes.

No.Code TypeDrawingUse
103-03,7Z10-15Measurements on cylindrical outer surfaces R10-R15
203-03,8Z14,5-30Measurements on cylindrical outer surfaces R14,5-R30
303-03,9Z25-50Measurements on cylindrical outer surfaces R25-R50
403-03,10HZ11-13Measurements on cylindrical inner surfaces R11-R13
503-03,11HZ12,5-17Measurements on cylindrical inner surfaces R12,5-R17
603-03,12HZ16,5-30Measurements on cylindrical inner surfaces R16,5-R30
703-03,13K10-15Measurements on spherical outer surfaces SR10-SR15
803-03,14K14,5-30Measurements on spherical outer surfaces SR14,5-SR30
903-03,15HK11-13Measurements on spherical inner surfaces SR11-SR13
1003-03,16HK12,5-17Measurements on spherical inner surfaces SR12,5-SR17
1103-03,17HK16,5-30Measurements on spherical inner surfaces SR16,5-SR30
1203-03,18UNMeasurements on cylindrical outer surfaces, adjustable radius R10-∞

Subject to technical changes.

HL Testblocks
TypeDimensionsWeightValues
HLDΦ: ≥ 119 mm H: ≥ 56 mmW: ≈ 2700 g(290 - 880) HLD
HLCΦ: ≥ 119 mm H: ≥ 56 mmW: ≈ 2700 g(525 - 905) HLC
HLDCΦ: ≥ 119 mm H: ≥ 56 mmW: ≈ 2700 g(490 - 830) HLDC
HLD+15Φ: ≥ 119 mm H: ≥ 56 mmW: ≈ 2700 g(481 - 850) HLD+15
HLDLΦ: ≥ 119 mm H: ≥ 56 mmW: ≈ 2700 g(687 - 925) HLDL
HLGΦ: ≥ 119 mm H: ≥ 70 mmW: ≈ 6200 g(280 - 680) HLG

Request a quote or further information here!

Areas of application of hardness testing devices

  • Manufacture of metallic components and rubber components 
  • Mechanical engineering 
  • Research and development 
  • Solid state physics

The following hardness testing devices might also be of interest to you: