With the Fe-probe you can measure non-magnetic coatings such as lacquer, plastics, chromium, copper, zinc, enamel, etc. on steel or iron. With the NFe-probe you can measure insulating coatings such as lacquer, enamel, plastics, paper, glass, rubber, etc. on aluminum, copper, brass, zinc and some sorts of stainless steel and anodized aluminum.

Coating thickness gauge
SaluTron® D1

Combination gauge with interchangeable probes for indestructible measurement

  • Waterproof under IP Code 65
  • Easy operating and setup by leading menu
  • Quick zeroing and calibration of the gauge
  • Setup units of measurement: µm or mil
  • High accuracy
  • Continuous measurement possible
  • V-groove enables measurements on axes or staves
  • Automatic probe detection
  • Setup of language: English or German
  • Automatic switch off
  • Low battery warning indication
  • Display backlight
Coating thickness gauge SaluTron D1

Coating thickness gauge
SaluTron® D2X

With all functions of D1, in addition with many other features

  • 8192 memory locations
  • Large, easily-readable display with backlight
  • Measured values can be stored in blocks
  • Calculation of average, standard deviation, minimum, maximum, coefficient of variation, histogram for single and multiple blocks
  • Input of data for a report such as date and time of the measuring blocks
  • RS 232 serial or USB port for interfacing to PC
  • Output of measuring report to serial-, IR-printer or PC
  • Output of measured values in different standard formats such as Excel, Lotus, etc
  • Setup of parameters for data transfer (baud rate, parity, data length)
  • Input of min/max tolerance limits with acoustic signal on exceedance
  • 16 application memories for special calibration with comment (16 signs)

Application of coating thickness gauges

  • paint shops
  • car insurances 
  • car experts/inspectors
  • automotive industry
  • shops
  • quality control 
  • bridge construction
  • ship construction
  • stock receipt 
  • production processes
  • laboratory 
Coating thickness gauge SaluTron D2X

Standard delivery range

  • SaluTron D1 or SaluTron D2X ©
  • Fe or NFe-probe
  • Fe and NFe-zero plates
  • Set with 8 calibrations standards
  • Batteries
  • USB/RS232 cable
  • Case
  • Manual

Optional accessory

Specifications

All SaluTron® gauges correspond to national (DIN) and international (ISO, BS, ASTM) norms and possess the CE-sign.
Specifications are subject to change without prior notice.

Base material (substrate) Fe iron or steel
NFe non-magnetic metals such as aluminum, zinc, copper, brass, some stainless steel grades
Layers Fe non-magnetic coatings such as lacquer, plastics, chromium, copper, zinc, enamel, etc.
NFe insulating coatings such as lacquer, enamel, plastics, paper, glass, rubber, etc., anodized aluminum
Measuring range Fe 0 - 2000 µm (0 - 2 mm) or 0.00 - 80 mil
NFe 0 - 800 µm (0 - 0.8 mm) or 0.00 - 32 mil
Measurement display Fe 0.0 - 999 µm and from then 1.00 - 2.00 mm
or 0.00 - 80 mil
NFe 0.0 - 800 µm or 0.0 - 32 mil
Resolution Fe
0.1 µm
1 µm
0.01 mm
or
0.01 mil
0.1 mil
in the range of 0.0 - 99.9 µm
in the range of 100 - 999 µm
in the range of 1.00 - 2.00 mm

in the range of 0.00 - 9.99 mil
in the range of 10.0 - 80.0 mill
NFe
0.1 µm
1 µm
or
0.01 mil
0.1 mil
in the range of 0.0 - 99.9 µm
in the range of 100 - 800 µm

in the range of 0.00 - 9.99 mil
in the range of 10.0 - 32 mil
Minimum thickness of base material Fe 0.20 mm or 8 mil
NFe 0.05 mm or 2 mil
Accuracy   ± (1.5 µm + 2%) or ± (0.06 mil +2%)
Minimum measuring area   10 x 10 mm or 0.4” x 0.4”
Memory D1 none
D2X 8192 locations
Blocks   optional in the range of memory’s capacity
Temperature Lagerung -10°C to 60°C or 14°F to 140°F
Betrieb -0°C to 60°C or 32°F to 140°F
Probes   One-Point
Interface D1 none
D2X USB / RS232
Printer   HP-infrared (distance max. 4.5 m, on request) or standard serial printer
Power supply   2 x 1.5 V AA alkaline
Dimensions (l x w x h) D1 150 x 82 x 33 mm or 5.9” x 3.2” x 1.3”
D2X 120 x 65 x 22 mm or 4.7” x 2.6” x 0.9”
Weight D1 150 g (with batteries) or 5.3 oz
D2X 260 g (with batteries) or 9.17 oz

Mini-Infrared-Printer SP 100

Mini-Infrared-Printer SP 100

The infrared pocket printer SP 100 completes the functions of SaluTron® D2X. An adapter enables wireless data transfer to print out measured and statistic values.

Other features are:

  • Thermal printing process
  • Magnetic surface to stick on metal
  • Universally applicable with other gauges
  • High printing speed (one print line = 24 signs per second)
  • Transfer distance from gauge to printer: up to 4.5 m
  • Very robust and handy
  • Size (length x width x height): only 15.5 x 9.2 x 6.5 cm or 6.1” x 3.6” x 2.5”
  • Independent of mains supply (four AA Alkali-batteries)

The SP 100 sticks on metal surfaces. Two strong magnets are embedded underneath the rubber coating.