Roughness tester TR200/TIME®3200 and TR220/TIME®3202

TR200/TIME®3200 and TR220/TIME®3202: Portable high-performance roughness measuring devices with up to 19 different roughness parameters

TR200/TIME®3200
TR220/TIME®3202

The portable roughness testers TR200/TIME®3200 and TR220/TIME®3202 are high-precision measuring instruments that impress with their wide measuring range and excellent performance. They are ideal for measuring roughness on metallic and non-metallic surfaces. Particularly noteworthy is the side-positioned probe of these roughness testers, which enables precise measurements on internal surfaces of bores and in grooves. This innovative feature expands the range of applications and ensures the highest accuracy even in hard-to-reach areas.

Properties of the TR200/TIME®3200

Selection menu facilitates operation
Display of 13 roughness parameters (TR200/TIME®3200)
Display of 19 roughness parameters (TR220/TIME®3202)
Wave filtering methods: RC, PC-RC, GAUSS, D-P
Cut-off wavelength: 0.25 mm / 0.8 mm / 2.5 mm
Visualization of the roughness profile and the material curve on the display
Display of the probe/stylus position
Various probes for measurements in bores, openings, and grooves
RS-232 interface
Available languages: German, English

Measurement principle of the TR200/TIME®3200

During the measurement process, the sensor is moved linearly along the probing path. The probe follows the profile of the probing path and moves up and down. These movements are converted into electrical signals, which are then amplified, filtered, and converted into digital values using an A/D converter. Based on these values, a mathematical representation of the profile is created using a microprocessor. Based on this representation, the Ra and Rz values (or Rq and Rt values) are then calculated according to the relevant standards and displayed on the screen.

Standard delivery scope

Device TR200/TIME®3200 / TR220/TIME®3202
Standard micro stylus TS-100
Roughness standard Ra
Protective cap for probe
Standard steel bracket
Charger
Operating manual
Case

Special accessories

TIMESurf Software with data cable
Probes for special applications: TS-110, TS-120, TS-130, TS-131
Right-angle probe TS-140
Measuring stands TIME®A201, TIME®A202, TA620

Downloads

Data Sheet TIME®3200 (PDF)

pdf - 215 KB

Data Sheet TR220 (PDF)

pdf - 323 KB

User Manual TR200 (PDF)

pdf - 542 KB

User Manual TR220 (PDF)

pdf - 3 MB

Specifications

	TR200/TIME®3200	TR220/TIME®3202
Roughness Parameters	Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr; µm/µinch switchable	Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr, Rpc, Rk, Rpk, Rvk, Mr1, Mr2; µm/µinch switchable
Measuring Range	Ra, Rq: 0.005 - 16 µm Rz, Ry, Rp, Rt, R3z: 0.02 - 160 µm RSm, RS: 2 - 4,000 µm Tp: 1 - 100 % (%Ry)	Ra: 0.005 - 16 µm Rz: 0.02 - 160 µm
Resolution	0.001 μm / 0.04 µinch
Cut-off Wavelength	0.25 mm / 0.8 mm / 2.5 mm / Auto
Traversing Length Ln	1 - 5 cut-off (selectable)
Traversing Path Ln	1 - 5 cut-off + 2 cut-off (selectable)
Digital Filter	RC, PC-RC, GAUSS, D-P
Probe/Stylus	Standard model TS-100, inductive, diamond tip 5µm radius, 90° angle
Probe Measuring Range	± 20µm / ± 40µm / ± 80µm
Boreholes from	6.0 mm, depth 15 mm (standard probe TS100)
Profiles	Primary profile (P), roughness profile (R), TP curve (material ratio Mr)	Finished profile (R)
Profile Magnification	Vv: 200x - 20000x Vh: 20x, 50x, 200x
Functions	Display of probe tip position, battery status display, direct display of roughness parameters and profiles, direct printout, LCD brightness adjustment, automatic shutdown after 5 min with automatic storage, calibration via software (for each cut-off wavelength)	Display of probe tip position, direct display of roughness parameters, direct printout, memory for 15 measurements, shutdown after 5 min with storage of the last measured value, calibration via software
PC Data Processing	RS232; direct to printer TA230 or PC, Dataview software
Display	128 x 64 graphic LCD with backlight
Power Supply	Li-Ion battery 1000mAh, rechargeable, charger 220V, 50 Hz, capacity for 3000 measurements
Environment	0°C - 40ºC, ≤ 80% rel. humidity
Standard	ISO, DIN, ANSI, JIS (selectable in menu)	according to ISO class 3
Dimensions (L x W x H)	140 x 52 x 48 mm (device without probe)
Weight	440g	440g

All SaluTron^® gauges correspond to national (DIN) and international (ISO, BS, ASTM) norms and possess the CE-sign.
Specifications are subject to change without prior notice.

Optional accessory for TR200/TIME®3200 and TR220/TIME®3202

Designation	Description	Product image
TS-100	Standard probe for roughness measurement on flat surfaces, on shafts and in bores from 5 mm diameter. Max. bore depth 22 mm.
TS-110	Probe with lateral skid for roughness measurement on convex and concave surfaces with a radius of curvature greater than 3 mm.
TS-120	Probe with offset skid for roughness measurements in bores from 2 mm. Max. bore depth 9 mm.
TS-130	Groove probe for surface roughness of grooves with a groove width greater than 2 mm and a groove depth less than 3 mm, as well as steps with a height less than 3 mm.
TS-131	Deep groove probe for surface roughness of grooves with a groove width greater than 2 mm and a groove depth less than 10 mm, as well as steps with a height less than 10 mm.
TS-140 Right-angle adapter	The TS-140 right-angle measuring mechanism includes a right-angle sensor and a right-angle adapter rod; the probe moves laterally for measurement. It can measure grooves, crankshafts and other surfaces. The minimum groove width of the measured workpiece is 5 mm. In addition, steps with a height of less than 2.5 mm can also be measured. For use with tooling.
Software TIMESurf	Software for evaluating and printing measurement values from TR200/TIME®3200 and TR220/TIME®3202
Measuring stand TIME®A202 (TA-202)	Small, light and easy to carry. Easy operation and suitable for various roughness testers. Dimensions: 300 mm × 200 mm × 400 mm Y-axial range: 200 mm Rotation: -85° ~ +85° Weight: 9.5 kg
Measuring stand TIME®A201	Compact measuring stand with double column, suitable for various roughness testers. Dimensions: 108 mm × 100 mm × 240 mm Y-axial range: 110 mm Rotation: -5° ~ +2.5° Weight: 3.3 kg Suitable for: TIME®3200 / TIME®3202 / TIME®3221 / TIME®3234
Measuring stand TA620	Screw lifting with a V-groove in the granite platform for measuring small workpieces, which improves the measurement accuracy. Granite platform: 400 mm × 250 mm × 70 mm Working surface accuracy: Class 00 (plane tolerance 3 µm) Vertical lifting height: 300 ± 1 mm Lifting return error: ≤ 1/6 turn of handwheel Suitable for: TIME®3200 / TIME®3202