![[Translate to English:]](/fileadmin/_processed_/d/a/csm_schichtdickenmessgeraet-salutron-d6_eeafb93410.webp "[Translate to English:]"){kind=small}
![[Translate to English:] SaluTron Vibro 200](/fileadmin/_processed_/f/1/csm_salutron-vibro-200_eda5baa52b.webp)
![[Translate to English:] SaluTron Vibro 260](/fileadmin/_processed_/5/3/csm_salutron-vibro-260_014d26f682.webp)
Leeb hardness tester TIME®5150 – compact, with Bluetooth and OLED display
TIME®5150
The TIME®5150 hardness tester is an extremely compact, integrated Leeb hardness tester (rebound method) with impact device type D. It is lightweight, easy to carry and can be operated with one hand. The instrument identifies the impact direction automatically, so measurement is possible in any direction (360°).
In addition, the TIME®5150 converts the readings into the common hardness scales (HL, HV, HB, HRC, HRB, HRA, HS) as well as into tensile strength and stores 100 groups of data. With comparison measurements, you can create your own hardness conversion table for customised materials.
The high-contrast OLED display shows all important values at a glance. Moreover, the instrument sends the readings wirelessly to a printer via Bluetooth, and the battery is conveniently charged via a Type-C connector.
Features of the TIME®5150
- compact, lightweight unit with integrated impact device type D, one-handed operation
- conversion of the common hardness scales (HL, HV, HB, HRC, HRB, HRA, HS) and of tensile strength
- 128 × 64 dot-matrix OLED display with high contrast and plenty of information
- customised materials: own hardness conversion table via comparison measurements (5 materials)
- automatic identification of common impact directions (360°)
- memory for 100 groups of measurement averages
- upper and lower hardness limits can be preset, with tolerance indication for series testing
- software calibration
- Bluetooth 4.2 for wireless output of the readings to a Bluetooth printer
- connection to the TIME app via Bluetooth (instrument version 2.1 or above)
- automatic power-off, time adjustable or can be disabled
- built-in rechargeable lithium battery with Type-C charging
Applications of the TIME®5150
- fast, mobile hardness testing of metallic materials directly on site
- hardness testing of series parts with preset limits and tolerance indication
- testing at hard-to-reach locations thanks to the compact design and one-handed operation
- documentation of the readings via a Bluetooth printer
Additional equipment for the TIME®5150
- Support rings for measurements on curved surfaces
- Bluetooth printer for printing the measurement data
Standard scope of delivery
- TIME®5150 hardness tester
- Test block HLD
- Small support ring
- Charger
- Cleaning brush
- Operating manual
Optional accessories
- Set of support rings for measurements on curved surfaces with a radius of less than 30 mm. They make it easier to position the instrument optimally on the test piece. Available in 12 different versions.
- Bluetooth printer for printing the measurement data
Downloads
Data sheet (PDF)
pdf - 149 KB
Technical specifications
| Measuring range | 170–960 HLD |
| Hardness scales | HL, HB, HRA, HRB, HRC, HV, HS and conversion to tensile strength |
| Measuring direction | 360° (automatic identification) |
| Accuracy | ± 6 HLD (at HLD = 790 ± 40) |
| Repeatability | 6 HLD (at HLD = 790 ± 40) |
| Display | OLED, 128 × 64 dots |
| Memory | 100 groups of data |
| Limit values | adjustable (170–960 HLD) |
| Customised materials | 5 |
| Wireless interface | Bluetooth 4.2 |
| Power supply | 5 V / 1 A, built-in lithium battery (Type-C) |
| Dimensions | 177 × 38 × 29 mm |
| Weight | 120 g |
| Optional accessories | Support rings, Bluetooth printer |
Material and hardness values
| Material | Hardness unit | Impact device |
|---|---|---|
| D | ||
| Steel, Cast steel | HRC | 20-68.5 |
| HRB | 38.4-99.6 | |
| HB | 127-651 | |
| HV | 83-976 | |
| HS | 32.2-99.5 | |
| Tool steel | HRC | 20.4-67.1 |
| HV | 80-898 | |
| Hammered steel | HB | 143-650 |
| Stainless steel | HRB | 46.5-101.7 |
| HB | 85-655 | |
| HV | 85-802 | |
| Gray cast iron | HRB | - |
| HB | 93-334 | |
| HV | - | |
| Nodular cast iron | HRC | - |
| HB | 131-387 | |
| HV | - | |
| Aluminum alloys | HB | 19-164 |
| HRB | 23.8-84.6 | |
| Brass | HB | 40-173 |
| HRB | 13.5-95.3 | |
| Bronze | HB | 60-290 |
| Copper wrought alloys | HB | 45-315 |
| No. | Code | Type | Drawing | Use |
|---|---|---|---|---|
| 1 | 03-03,7 | Z10-15 |  | Measurements on cylindrical outer surfaces R10-R15 |
| 2 | 03-03,8 | Z14,5-30 | Measurements on cylindrical outer surfaces R14,5-R30 | |
| 3 | 03-03,9 | Z25-50 | Measurements on cylindrical outer surfaces R25-R50 | |
| 4 | 03-03,10 | HZ11-13 |  | Measurements on cylindrical inner surfaces R11-R13 |
| 5 | 03-03,11 | HZ12,5-17 | Measurements on cylindrical inner surfaces R12,5-R17 | |
| 6 | 03-03,12 | HZ16,5-30 | Measurements on cylindrical inner surfaces R16,5-R30 | |
| 7 | 03-03,13 | K10-15 |  | Measurements on spherical outer surfaces SR10-SR15 |
| 8 | 03-03,14 | K14,5-30 | Measurements on spherical outer surfaces SR14,5-SR30 | |
| 9 | 03-03,15 | HK11-13 |  | Measurements on spherical inner surfaces SR11-SR13 |
| 10 | 03-03,16 | HK12,5-17 | Measurements on spherical inner surfaces SR12,5-SR17 | |
| 11 | 03-03,17 | HK16,5-30 | Measurements on spherical inner surfaces SR16,5-SR30 | |
| 12 | 03-03,18 | UN |  | Measurements on cylindrical outer surfaces, adjustable radius R10-∞ |
HL Testblocks
| Type | Dimensions | Weight | Values |
|---|---|---|---|
| HLD | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (290 - 880) HLD |
| HLC | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (525 - 905) HLC |
| HLDC | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (490 - 830) HLDC |
| HLD+15 | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (481 - 850) HLD+15 |
| HLDL | Φ: ≥ 119 mm H: ≥ 56 mm | W: ≈ 2700 g | (687 - 925) HLDL |
| HLG | Φ: ≥ 119 mm H: ≥ 70 mm | W: ≈ 6200 g | (280 - 680) HLG |
Subject to technical changes.
Areas of application of hardness testers such as the TIME®5150
- Manufacture of metallic components
- Mechanical engineering
- Quality assurance and incoming goods inspection
- Maintenance and repair
- Research and development